Samsung Washing Machine Does Not Drain – Causes, Troubleshooting & Easy Fixes

If your Samsung washing machine is not draining water, don’t panic! This is one of the most common problems faced by Samsung users, especially in top-load and front-load models. The machine might display an error code like 5E, SE, or simply stop mid-cycle with water left inside the drum.

Below, we explain the top causes, how to fix it yourself, and where to buy the right part at the best price in India.

⚠️ Common Signs 

• Washing machine stops mid-cycle

• Water stays inside after spin

• Error code “5E” or “SE” displayed

• Gurgling or humming sound, but no draining

🔧 Section: Top 5 Reasons Why Samsung Washing Machine Won’t Drain

(H2)

1. Clogged Drain Hose
   The most common reason. A blocked drain hose stops water from exiting the drum. Check for kinks or debris.

2. Blocked Pump Filter
   Lint, coins, or small fabric items may block the drain pump filter. Clean it regularly (bottom front flap).

3. Drain Motor Failure
   The drain motor is the part that powers water out of the drum. If it’s weak, jammed, or burnt out, it must be replaced.
   👉 Buy Samsung Drain Motor Online – ₹499

4. Faulty Wiring or Loose Connection
   If the wire that powers the motor is damaged or the plug is loose, the motor won’t work.

5. PCB/Control Board Issue
   Rare, but if the circuit board fails to send signals to the drain motor, it won’t activate.

🧰 Section: DIY Troubleshooting Steps

Try these simple steps before calling a technician:

1. Unplug the machine

2. Check and clean the drain hose – remove and flush with water

3. Clean the pump filter – check for coins, lint, etc.

4. Test the drain motor using a multimeter (180Ω resistance expected)

5. If damaged, replace the drain motor (easy, 10-min task)